The show dialer interface [BRI] command displays information in the same format as the legacy DDR statistics on incoming and outgoing calls.

The message “Dialer state is data link layer up” suggests that the dialer came up properly and interface BRI 0/0:1 is bound to the profile dialer1.

The show isdn active command displays information about the current active ISDN calls. In this output, the ISDN call is outgoing to a remote router named Seattle.

The show isdn status command displays information about the three layers of the BRI interface. In this output, ISDN Layer 1 is active, ISDN Layer 2 is established with SPID1 and SPID2 validated, and there is one active connection on Layer 3.

Web Links Configuration Examples http://www.cisco.com/en/US/tech/ tk801/tk133/tech_configuration_ examples_list.html