intDialerC.addSC("access-expression", "Build a bridge boolean access expression"); intDialerC["access-expression"].addSC("input", "Filter input packets"); intDialerC["access-expression"].addSC("output", "Filter output packets"); intDialerC.addSC("apollo", "Apollo interface subcommands"); intDialerC.apollo.addSC("access-group", "Apply an access list to output packets"); intDialerC.apollo.addSC("network", "Assign an Apollo network & enable Apollo routing"); intDialerC.apollo.addSC("update-time", "Set Apollo routing update timer"); intDialerC.addSC("appletalk", "Appletalk interface subcommands"); intDialerC.appletalk.addSC("access-group", "Apply an access list to inbound or outbound packets"); intDialerC.appletalk.addSC("address", "Set appletalk Phase 1 address"); intDialerC.appletalk.addSC("arp-timeout", "arp-timeout"); intDialerC.appletalk.addSC("cable-range", "Set appletalk Phase 2 address"); intDialerC.appletalk.addSC("client-mode", "Allow PPP client connections."); intDialerC.appletalk.addSC("discovery", "Reset discovery mode for new cable range discovery"); intDialerC.appletalk.addSC("distribute-list", "Filter networks from routing updates"); intDialerC.appletalk.addSC("domain-group", "Specify appletalk domain"); intDialerC.appletalk.addSC("eigrp-bandwidth-percent", "Set EIGRP bandwidth limit"); intDialerC.appletalk.addSC("eigrp-splithorizon", "Enable Split Horizon processing generating AT/EIGRP updates"); intDialerC.appletalk.addSC("eigrp-timers", "AT/EIGRP hello and holdtime timers"); intDialerC.appletalk.addSC("free-trade-zone", "Enhanced security for one-way shared networks"); intDialerC.appletalk.addSC("getzonelist-filter", "Filter zone-list replies"); intDialerC.appletalk.addSC("glean-packets", "Glean AARP information from packets"); intDialerC.appletalk.addSC("protocol", "Select AppleTalk routing protocol"); intDialerC.appletalk.addSC("route-cache", "Enable appletalk route cache"); intDialerC.appletalk.addSC("rtmp-splithorizon", "Enable Split Horizon processing generating AT/RTMP updates"); intDialerC.appletalk.addSC("rtmp-stub", "Send only RTMP stubs, no routes in updates"); intDialerC.appletalk.addSC("send-rtmps", "Send Appletalk routing updates"); intDialerC.appletalk.addSC("zip-reply-filter", "Filter ZIP replies"); intDialerC.appletalk.addSC("zone", "Assign an appletalk zone name"); intDialerC.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intDialerC.arp.addSC("arpa", "Standard arp protocol"); intDialerC.arp.addSC("frame-relay", "Enable ARP for a frame relay interface"); intDialerC.arp.addSC("probe", "HP style arp protocol"); intDialerC.arp.addSC("snap", "IEEE 802.3 style arp"); intDialerC.arp.addSC("timeout", "Set ARP cache timeout"); intDialerC.addSC("asp", "ASP interface subcommands"); intDialerC.asp.addSC("addr-offset", "Offset in frame of address byte"); intDialerC.asp.addSC("assert-dtr", "Assert DTR signal on Tx only"); intDialerC.asp.addSC("role", "Set role on this interface"); intDialerC.asp.addSC("rx-ift", "Rx inter frame timeout in milli-seconds"); intDialerC.addSC("autodetect", "Autodetect Encapsulations on Serial interface"); intDialerC.autodetect.addSC("encapsulation", "list of allowed encapsulations for autodetect"); intDialerC.addSC("bandwidth", "Set bandwidth informational parameter"); intDialerC.bandwidth.addSC("<1-10000000>", "Bandwidth in kilobits"); intDialerC.addSC("bridge-group", "Transparent bridging interface parameters"); intDialerC["bridge-group"].addSC("<1-255>", "Assign an interface to a Bridge Group."); intDialerC.addSC("bsc", "BSC interface subcommands"); intDialerC.bsc.addSC("char-int", "Inform BSC to receive frame character by character for Quicc Serial"); intDialerC.bsc.addSC("char-set", "Defines the character set to be used on this interface"); intDialerC.bsc.addSC("contention", "Define this link to be a point-to-point station"); intDialerC.bsc.addSC("dial-contention", "Define this link to be a 3780-RJE concentrator point"); intDialerC.bsc.addSC("extended-address", "Add poll/select address pairs"); intDialerC.bsc.addSC("host-timeout", "inactivity time for polls from the host in deciseconds"); intDialerC.bsc.addSC("pause", "Specify pause timeout in tenths of seconds"); intDialerC.bsc.addSC("poll-timeout", "Specify poll-timeout in tenths of seconds"); intDialerC.bsc.addSC("primary", "Define this link to be the primary Bi-Synchronous station"); intDialerC.bsc.addSC("retries", "Specify number of retries"); intDialerC.bsc.addSC("secondary", "Define this link to be the secondary Bi-Synchronous station"); intDialerC.bsc.addSC("servlim", "Specify servlim (active v's inactive end-station poll ratio) as a value"); intDialerC.bsc.addSC("spec-poll", "Inform BSC local-ack to handle specific polls"); intDialerC.addSC("bstun", "BSTUN interface subcommands"); intDialerC.bstun.addSC("group", "Assign an interface to a BSTUN group"); intDialerC.bstun.addSC("route", "Set forwarding of BSTUN frames"); intDialerC.addSC("carrier-delay", "Specify delay for interface transitions"); intDialerC["carrier-delay"].addSC("<0-60>", "Carrier Transitions delay seconds"); intDialerC["carrier-delay"].addSC("msec", "delay specified in milliseconds"); intDialerC.addSC("cdp", "CDP interface subcommands"); intDialerC.cdp.addSC("enable", "Enable CDP on interface"); intDialerC.addSC("clns", "CLNS interface subcommands"); intDialerC.clns.addSC("access-group", "Filter inbound or outbound CLNS traffic"); intDialerC.clns.addSC("adjacency-filter", "Filter adjacencies"); intDialerC.clns.addSC("checksum", "Enable checksum generation"); intDialerC.clns.addSC("cluster-alias", "Enable DECnet Phase V cluster aliasing"); intDialerC.clns.addSC("congestion-threshold", "Set the congestion experience bit if the output queue contains more than the specified number of packets"); intDialerC.clns.addSC("dec-compatible", "Received NSAPs do not contain N-selector octet"); intDialerC.clns.addSC("enable", "Enable CLNS and ES-IS routing on interface"); intDialerC.clns.addSC("erpdu-interval", "Minimum interval between ERPDUs"); intDialerC.clns.addSC("es-neighbor", "End system SNPA static mapping configuration"); intDialerC.clns.addSC("esct-time", "Suggested ES configuration time"); intDialerC.clns.addSC("is-neighbor", "Intermediate system SNPA static mapping configuration"); intDialerC.clns.addSC("mtu", "Set MTU packet size for interface"); intDialerC.clns.addSC("net", "Set the CLNS address for this interface"); intDialerC.clns.addSC("rdpdu-interval", "Define the minimum interval between Redirect PDUs"); intDialerC.clns.addSC("route-cache", "Enable fast switching through the cache"); intDialerC.clns.addSC("router", "Enable CLNS routing protocol on interface"); intDialerC.clns.addSC("send-erpdu", "Send error PDUs when an error is detected in a data PDU"); intDialerC.clns.addSC("send-rdpdu", "Send redirect PDUs to optimize routing"); intDialerC.clns.addSC("split-horizon", "Enable ISO-IGRP split horizon"); intDialerC.addSC("clock", "Configure serial interface clock"); intDialerC.clock.addSC("rate", "Configure serial interface clock speed"); intDialerC.clock.rate.addSC("<300-4000000>", "Choose clockrate from list above"); intDialerC.addSC("compress", "Set serial interface for compression"); intDialerC.compress.addSC("stac", "stac compression algorithm"); intDialerC.addSC("cpp", "Combinet Proprietary Protocol"); intDialerC.cpp.addSC("authentication", "Set cpp authentication to required"); intDialerC.cpp.addSC("callback", "Set CPP link callback option"); intDialerC.addSC("crypto", "Encryption/Decryption commands"); intDialerC.crypto.addSC("map", "Assign a Crypto Map"); intDialerC.crypto.map.addSC("WORD", "Crypto Map tag"); intDialerC.addSC("custom-queue-list", "Assign a custom queue list to an interface"); intDialerC["custom-queue-list"].addSC("<1-16>", "Custom queue list number"); intDialerC.addSC("decnet", "Interface DECnet config commands"); intDialerC.decnet.addSC("<0-3>", "ATG network number"); intDialerC.decnet.addSC("access-group", "Set access control for outgoing packets"); intDialerC.decnet.addSC("accounting", "Enable Accounting of DECnet traffic"); intDialerC.decnet.addSC("cluster-holdtime", "Interval to hold PhaseIV VAX cluster adjacencies"); intDialerC.decnet.addSC("congestion-threshold", "Congestion avoidance threshold"); intDialerC.decnet.addSC("cost", "Set cost value for interface"); intDialerC.decnet.addSC("hello-timer", "Set interval between transmitted HELLO messages"); intDialerC.decnet.addSC("in-routing-filter", "Set up access control for incoming routing information"); intDialerC.decnet.addSC("multicast-map", "DECnet multicast mapping on token ring"); intDialerC.decnet.addSC("out-routing-filter", "Set up access control for outgoing routing information"); intDialerC.decnet.addSC("route-cache", "Enable fast-switching of DECnet datagrams"); intDialerC.decnet.addSC("router-priority", "Set priority for determining default router"); intDialerC.decnet.addSC("routing-timer", "Set interval between transmitted routing messages"); intDialerC.decnet.addSC("split-horizon", "Enable split horizon on interface"); intDialerC.addSC("default", "Set a command to its defaults"); intDialerC["default"].addSC("access-expression", "Build a bridge boolean access expression"); intDialerC["default"].addSC("apollo", "Apollo interface subcommands"); intDialerC["default"].addSC("appletalk", "Appletalk interface subcommands"); intDialerC["default"].addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intDialerC["default"].addSC("asp", "ASP interface subcommands"); intDialerC["default"].addSC("autodetect", "Autodetect Encapsulations on Serial interface"); intDialerC["default"].addSC("bandwidth", "Set bandwidth informational parameter"); intDialerC["default"].addSC("bridge-group", "Transparent bridging interface parameters"); intDialerC["default"].addSC("bsc", "BSC interface subcommands"); intDialerC["default"].addSC("bstun", "BSTUN interface subcommands"); intDialerC["default"].addSC("carrier-delay", "Specify delay for interface transitions"); intDialerC["default"].addSC("cdp", "CDP interface subcommands"); intDialerC["default"].addSC("clns", "CLNS interface subcommands"); intDialerC["default"].addSC("clock", "Configure serial interface clock"); intDialerC["default"].addSC("compress", "Set serial interface for compression"); intDialerC["default"].addSC("cpp", "Combinet Proprietary Protocol"); intDialerC["default"].addSC("crypto", "Encryption/Decryption commands"); intDialerC["default"].addSC("custom-queue-list", "Assign a custom queue list to an interface"); intDialerC["default"].addSC("decnet", "Interface DECnet config commands"); intDialerC.addSC("delay", "Specify interface throughput delay"); intDialerC.delay.addSC("<1-16777215>", "Throughput delay (tens of microseconds)"); intDialerC.addSC("description", "Interface specific description"); intDialerC.description.addSC("LINE", "Up to 240 characters describing this interface"); intDialerC.addSC("dialer", "Dial-on-demand routing (DDR) commands"); intDialerC.dialer.addSC("aaa", "Allow dialer to access AAA for dialing information"); intDialerC.dialer.addSC("callback-secure", "Enable callback security"); intDialerC.dialer.addSC("called", "Specify called telephone number to be screened"); intDialerC.dialer.addSC("caller", "Specify calling telephone number to be screened"); intDialerC.dialer.addSC("congestion-threshold", "Specify congestion threshold"); intDialerC.dialer.addSC("dns", "Allow dialer to access DNS for dialing information"); intDialerC.dialer.addSC("enable-timeout", "Set length of time an interface stays down before it is available for dialing"); intDialerC.dialer.addSC("fast-idle", "Set idle time before disconnecting line with an unusually high level of contention"); intDialerC.dialer.addSC("hold-queue", "Configure output hold queue"); intDialerC.dialer["hold-queue"].addSC("<0-100>", "Specify size of output hold queue"); intDialerC.dialer["hold-queue"]["<0-100>"].addSC("timeout", "Specify length of time data is held while interface is connecting"); intDialerC.dialer["hold-queue"]["<0-100>"].timeout.addSC("<1-2147483>", "Holdq timeout in seconds is this value + enable time"); intDialerC.dialer.addSC("idle-timeout", "Specify idle timeout before disconnecting line"); intDialerC.dialer.addSC("in-band", "Set v.25bis dialing for interface"); intDialerC.dialer.addSC("load-threshold", "Specify threshold for placing additional calls"); intDialerC.dialer.addSC("map", "Define multiple dial-on-demand numbers"); intDialerC.dialer.addSC("pool", "Specify dialer pool to be used"); intDialerC.dialer.pool.addSC("<1-255>", "Dialer pool number"); intDialerC.dialer.addSC("priority", "Specify priority for use in dialer group"); intDialerC.dialer.addSC("redial", "Configure redial for this interface"); intDialerC.dialer.addSC("remote-name", "Configure a remote name"); intDialerC.dialer.addSC("reserved-links", "Specify link reservations"); intDialerC.dialer.addSC("rotor", "Set outbound rotor order"); intDialerC.dialer.addSC("snapshot", "Enable snapshot address for dialer profile"); intDialerC.dialer.addSC("string", "Specify telephone number to be passed to DCE device"); intDialerC.dialer.string.addSC("WORD", "Dialer string"); intDialerC.dialer.string.WORD.addSC("class", "Map Class for the Dialer String"); intDialerC.dialer.string.WORD.class.addSC("WORD", "Class String"); intDialerC.dialer.string.WORD.addSC("modem-script", "Specify regular expression to select modem dialing script"); intDialerC.dialer.string.WORD["modem-script"].addSC("WORD", "Regular expression"); intDialerC.dialer.string.WORD.addSC("system-script", "Specify regular expression to select system dialing script"); intDialerC.dialer.string.WORD["system-script"].addSC("WORD", "Regular expression"); intDialerC.dialer.addSC("vpdn", "Enable vpdn dial"); intDialerC.dialer.addSC("wait-for-carrier-time", "How long the router will wait for carrier"); intDialerC.dialer.addSC("watch-disable", "Time to wait before bringing down watched route link"); intDialerC.dialer.addSC("watch-group", "Assign interface to dialer-watch-list"); intDialerC.addSC("dialer-group", "Assign interface to dialer-list"); intDialerC["dialer-group"].addSC("<1-10>", "Dialer list number"); intDialerC.addSC("down-when-looped", "Force looped serial interface down"); intDialerC.addSC("dspu", "Down Stream PU"); intDialerC.dspu.addSC("enable-host", "DSPU Enable Host command"); intDialerC.dspu.addSC("enable-pu", "DSPU Enable Pu command"); intDialerC.dspu.addSC("start", "DSPU Start command"); intDialerC.addSC("dxi", "ATM-DXI configuration commands"); intDialerC.dxi.addSC("interface-dfa", "Define a DFA as part of a subinterface"); intDialerC.dxi.addSC("map", "Map a given VPI and VCI to a ATM-DXI DFA"); intDialerC.dxi.addSC("pvc", "define PVC attributes"); intDialerC.addSC("encapsulation", "Set encapsulation type for an interface"); intDialerC.encapsulation.addSC("cpp", "Combinet proprietary protocol"); intDialerC.encapsulation.addSC("frame-relay", "Frame Relay networks"); intDialerC.encapsulation["frame-relay"].addSC("ietf", "Use RFC1490/RFC2427 encapsulation"); intDialerC.encapsulation.addSC("hdlc", "Serial HDLC synchronous"); intDialerC.encapsulation.addSC("lapb", "LAPB (X.25 Level 2)"); intDialerC.encapsulation.addSC("ppp", "Point-to-Point protocol"); intDialerC.encapsulation.addSC("slip", "Serial Line IP"); intDialerC.encapsulation.addSC("x25", "X.25"); intDialerC.addSC("exit", "Exit from interface configuration mode"); intDialerC.addSC("fair-queue", "Enable Fair Queuing on an Interface"); intDialerC["fair-queue"].addSC("<1-4096>", "Congestive Discard Threshold"); intDialerC.addSC("fras", "DLC Switch Interface Command"); intDialerC.fras.addSC("backup", "Setup backup route"); intDialerC.fras.addSC("ban", "RFC 1490 bridged 802.5"); intDialerC.fras.addSC("ddr-backup", "Setup backup route"); intDialerC.fras.addSC("map", "Set forwarding of frames"); intDialerC.addSC("full-duplex", "Configure full-duplex operational mode"); intDialerC.addSC("h323-gateway", "Configure H323 Gateway"); intDialerC["h323-gateway"].addSC("voip", "Configure H323 Gateway Voip Interface"); intDialerC.addSC("half-duplex", "Configure half-duplex and related commands"); intDialerC["half-duplex"].addSC("timer", "Half-duplex timer tuning commands"); intDialerC.addSC("help", "Description of the interactive help system"); intDialerC.addSC("hold-queue", "Set hold queue depth"); intDialerC["hold-queue"].addSC("<0-4096>", "Queue length"); intDialerC.addSC("ip", "Interface Internet Protocol config commands"); intDialerC.ip.addSC("access-group", "Specify access control for packets"); intDialerC.ip.addSC("accounting", "Enable IP accounting on this interface"); intDialerC.ip.addSC("address", "Set the IP address of an interface"); intDialerC.ip.address.addSC("A.B.C.D", "IP address"); intDialerC.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); intDialerC.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); intDialerC.ip.address.addSC("negotiated", "IP Address negotiated over PPP"); intDialerC.ip.address.negotiated.addSC("previous", "IPCP attempts to negotiate previous address assigned"); intDialerC.ip.addSC("authentication", "authentication subcommands"); intDialerC.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intDialerC.ip["bandwidth-percent"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); intDialerC.ip["bandwidth-percent"].eigrp.addSC("<1-65535>", "Autonomous system number"); intDialerC.ip["bandwidth-percent"].eigrp["<1-65535>"].addSC("<1-999999>", "Maximum bandwidth percentage that EIGRP may use"); intDialerC.ip.addSC("bgp", "BGP interface commands"); intDialerC.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); intDialerC.ip.addSC("cef", "Cisco Express Fowarding interface commands"); intDialerC.ip.addSC("cgmp", "Enable/disable CGMP"); intDialerC.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); intDialerC.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); intDialerC.ip.addSC("dvmrp", "DVMRP interface commands"); intDialerC.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); intDialerC.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); intDialerC.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); intDialerC.ip.addSC("igmp", "IGMP interface commands"); intDialerC.ip.addSC("irdp", "ICMP Router Discovery Protocol"); intDialerC.ip.addSC("load-sharing", "Style of load sharing"); intDialerC.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); intDialerC.ip.addSC("mobile", "Mobile IP support"); intDialerC.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); intDialerC.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); intDialerC.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); intDialerC.ip.addSC("multicast", "IP multicast interface commands"); intDialerC.ip.addSC("nat", "NAT interface commands"); intDialerC.ip.nat.addSC("inside", "Inside interface for address translation"); intDialerC.ip.nat.addSC("outside", "Outside interface for address translation"); intDialerC.ip.addSC("nbar", "Network-Based Application Recognition"); intDialerC.ip.addSC("nhrp", "NHRP interface subcommands"); intDialerC.ip.addSC("ospf", "OSPF interface commands"); intDialerC.ip.ospf.addSC("authentication", "Enable authentication"); intDialerC.ip.ospf.addSC("authentication-key", "Authentication password (key)"); intDialerC.ip.ospf.addSC("cost", "Interface cost"); intDialerC.ip.ospf.cost.addSC("<1-65535>", "Cost"); intDialerC.ip.ospf.addSC("database-filter", "Filter OSPF LSA during synchronization and flooding"); intDialerC.ip.ospf.addSC("dead-interval", "Interval after which a neighbor is declared dead"); intDialerC.ip.ospf["dead-interval"].addSC("<1-65535>", "Seconds"); intDialerC.ip.ospf.addSC("demand-circuit", "OSPF demand circuit"); intDialerC.ip.ospf.addSC("flood-reduction", "OSPF Flood Reduction"); intDialerC.ip.ospf.addSC("hello-interval", "Time between HELLO packets"); intDialerC.ip.ospf["hello-interval"].addSC("<1-65535>", "Seconds"); intDialerC.ip.ospf.addSC("message-digest-key", "Message digest authentication password (key)"); intDialerC.ip.ospf.addSC("mtu-ignore", "Ignores the MTU in DBD packets"); intDialerC.ip.ospf.addSC("network", "Network type"); intDialerC.ip.ospf.addSC("priority", "Router priority"); intDialerC.ip.ospf.addSC("retransmit-interval", "Time between retransmitting lost link state advertisements"); intDialerC.ip.ospf.addSC("transmit-delay", "Link state transmit delay"); intDialerC.ip.addSC("pgm", "PGM Reliable Transport Protocol"); intDialerC.ip.addSC("pim", "PIM interface commands"); intDialerC.ip.addSC("policy", "Enable policy routing"); intDialerC.ip.addSC("probe", "Enable HP Probe support"); intDialerC.ip.addSC("proxy-arp", "Enable proxy ARP"); intDialerC.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); intDialerC.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); intDialerC.ip.addSC("rgmp", "Enable/disable RGMP"); intDialerC.ip.addSC("rip", "Router Information Protocol"); intDialerC.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); intDialerC.ip.addSC("router", "IP router interface commands"); intDialerC.ip.addSC("rsvp", "RSVP interface commands"); intDialerC.ip.addSC("rtp", "RTP parameters"); intDialerC.ip.addSC("sap", "Session Announcement Protocol interface commands"); intDialerC.ip.addSC("security", "DDN IP Security Option"); intDialerC.ip.addSC("split-horizon", "Perform split horizon"); intDialerC.ip.addSC("summary-address", "Perform address summarization"); intDialerC.ip["summary-address"].addSC("eigrp", "Enhanced Interior Gateway Routing Protocol (EIGRP)"); intDialerC.ip["summary-address"].eigrp.addSC("<1-65535>", "Autonomous system number"); intDialerC.ip["summary-address"].eigrp["<1-65535>"].addSC("A.B.C.D", "IP address"); intDialerC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); intDialerC.ip["summary-address"].eigrp["<1-65535>"]["A.B.C.D"]["A.B.C.D"].addSC("<1-255>", "Administrative distance"); intDialerC.ip["summary-address"].addSC("rip", "Routing Information Protocol (RIP)"); intDialerC.ip["summary-address"].rip.addSC("A.B.C.D", "IP address"); intDialerC.ip["summary-address"].rip["A.B.C.D"].addSC("A.B.C.D", "IP network mask"); intDialerC.ip.addSC("tcp", "TCP header compression parameters"); intDialerC.ip.addSC("trigger-authentication", "Enable trigger-authentication"); intDialerC.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); intDialerC.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); intDialerC.ip.addSC("urd", "Configure URL Rendezvousing"); intDialerC.ip.addSC("verify", "Enable per packet validation"); intDialerC.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); intDialerC.ip.addSC("wccp", "WCCP interface commands"); intDialerC.addSC("ipx", "Novell/IPX interface subcommands"); intDialerC.ipx.addSC("access-group", "Apply an access list to inbound or outbound packets"); intDialerC.ipx.addSC("accounting", "Enable IPX accounting on this interface"); intDialerC.ipx.addSC("advertise-default-route-only", "Only advertise the IPX/RIP default route out onto this network"); intDialerC.ipx.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intDialerC.ipx.addSC("compression", "Select IPX compression commands"); intDialerC.ipx.addSC("delay", "Set an IPX delay on the interface, in 'ticks'"); intDialerC.ipx.addSC("down", "Bring an IPX network administratively down"); intDialerC.ipx.addSC("encapsulation", "IPX encapsulation"); intDialerC.ipx.addSC("gns-reply-disable", "Disable Get Nearest Server replies on this interface"); intDialerC.ipx.addSC("gns-response-delay", "Delay in answering GNS on this interface"); intDialerC.ipx.addSC("hello-interval", "Configures IPX EIGRP hello interval"); intDialerC.ipx.addSC("helper-address", "Forward broadcasts to a specific address"); intDialerC.ipx.addSC("helper-list", "Filter helpered IPX packets on input"); intDialerC.ipx.addSC("hold-down", "Configures IPX EIGRP routes hold down time"); intDialerC.ipx.addSC("hold-time", "Configures IPX EIGRP hold time"); intDialerC.ipx.addSC("input-network-filter", "Filter incoming routing updates"); intDialerC.ipx.addSC("input-sap-filter", "Filter services learned from the Service Advertising Protocol"); intDialerC.ipx.addSC("ipxwan", "Configure IPXWAN on this interface"); intDialerC.ipx.addSC("link-delay", "Set an IPX link delay on the interface, in microseconds"); intDialerC.ipx.addSC("linkup-request", "Send RIP/SAP requests when interface comes up"); intDialerC.ipx.addSC("netbios", "Setup IPX NetBIOS filters and caching on this interface"); intDialerC.ipx.addSC("network", "Assign an IPX network & enable IPX routing"); intDialerC.ipx.addSC("nhrp", "NHRP interface subcommands"); intDialerC.ipx.addSC("nlsp", "Select NLSP commands"); intDialerC.ipx.addSC("output-ggs-filter", "Filter services reported in response to Get General Service"); intDialerC.ipx.addSC("output-gns-filter", "Filter services reported in response to Get Nearest Server"); intDialerC.ipx.addSC("output-network-filter", "Filter outgoing routing updates"); intDialerC.ipx.addSC("output-rip-delay", "Interpacket delay for RIP updates"); intDialerC.ipx.addSC("output-sap-delay", "Interpacket delay for SAP updates"); intDialerC.ipx.addSC("output-sap-filter", "Filter services learned from the Service Advertising Protocol"); intDialerC.ipx.addSC("pad-process-switched-packets", "Pad odd-length packets on output (process-switched only)"); intDialerC.ipx.addSC("rip-max-packetsize", "Maximum size of RIP packets being sent on interface"); intDialerC.ipx.addSC("rip-multiplier", "Multiple of RIP update interval for aging of RIP routes"); intDialerC.ipx.addSC("rip-response-delay", "Delay in answering RIP on this interface"); intDialerC.ipx.addSC("route-cache", "Enable fast switching"); intDialerC.ipx.addSC("router-filter", "Filter sources of routing updates"); intDialerC.ipx.addSC("router-sap-filter", "Select source router and service type of SAP updates"); intDialerC.ipx.addSC("sap-helper", "Forward SAP broadcasts queries to a specific address"); intDialerC.ipx.addSC("sap-incremental", "Send incremental SAP updates - for IPX EIGRP networks only"); intDialerC.ipx.addSC("sap-max-packetsize", "Maximum size of SAP packets being sent on interface"); intDialerC.ipx.addSC("sap-multiplier", "Multiple of SAP update interval for aging of SAP routes"); intDialerC.ipx.addSC("split-horizon", "Perform split horizon"); intDialerC.ipx.addSC("spx-idle-time", "Set an SPX idle time on the interface, in seconds"); intDialerC.ipx.addSC("spx-spoof", "Spoof SPX keepalives packets"); intDialerC.ipx.addSC("throughput", "Set IPX link throughput in bit per second"); intDialerC.ipx.addSC("triggered-rip-delay", "Interpacket delay for triggered RIP updates (override output-rip-delay for triggered updates only)"); intDialerC.ipx.addSC("triggered-rip-holddown", "Initial holddown for triggered RIP updates"); intDialerC.ipx.addSC("triggered-sap-delay", "Interpacket delay for triggered SAP updates (override output-rip-delay for triggered updates only)"); intDialerC.ipx.addSC("triggered-sap-holddown", "Initial holddown for triggered SAP updates"); intDialerC.ipx.addSC("type-20-propagation", "Forward IPX type 20 propagation packets"); intDialerC.ipx.addSC("update", "RIP/SAP update commands"); intDialerC.ipx.addSC("watchdog", "Special handling for IPX server watchdog packets"); intDialerC.addSC("isis", "IS-IS commands"); intDialerC.isis.addSC("adjacency-filter", "Filter IS-IS adjacencies"); intDialerC.isis.addSC("circuit-type", "Configure circuit type for interface"); intDialerC.isis.addSC("csnp-interval", "Set CSNP interval in seconds"); intDialerC.isis.addSC("hello", "Add padding to IS-IS hello packets"); intDialerC.isis.addSC("hello-interval", "Set Hello interval in seconds"); intDialerC.isis.addSC("hello-multiplier", "Set multiplier for Hello holding time"); intDialerC.isis.addSC("lsp-interval", "Set LSP transmission interval"); intDialerC.isis.addSC("mesh-group", "Set ISIS mesh group"); intDialerC.isis.addSC("metric", "Configure the metric for interface"); intDialerC.isis.addSC("password", "Configure the authentication password for interface"); intDialerC.isis.addSC("priority", "Set priority for Designated Router election"); intDialerC.isis.addSC("retransmit-interval", "Set per-LSP retransmission interval"); intDialerC.isis.addSC("retransmit-throttle-interval", "Set interface LSP retransmission interval"); intDialerC.isis.addSC("three-way-handshake", "Select Cisco or IETF three-way handshake"); intDialerC.addSC("iso-igrp", "ISO-IGRP interface subcommands"); intDialerC["iso-igrp"].addSC("adjacency-filter", "Filter ISO-IGRP adjacencies"); intDialerC.addSC("keepalive", "Enable keepalive"); intDialerC.keepalive.addSC("<0-32767>", "Keepalive period (default 10 seconds)"); intDialerC.addSC("lan-name", "LAN Name command"); intDialerC["lan-name"].addSC("WORD", "Up to 8 characters lan name"); intDialerC.addSC("lat", "LAT commands"); intDialerC.lat.addSC("enabled", "Enable LAT protocol translation"); intDialerC.lat.addSC("host", "Statically define LAT services"); intDialerC.addSC("line-power", "Provide power on the line."); intDialerC.addSC("llc2", "LLC2 Interface Subcommands"); intDialerC.llc2.addSC("N2", "Number of times router should retry various operations"); intDialerC.llc2.addSC("ack-delay-time", "Max time the router allows incoming I-frames to stay unacknowledged"); intDialerC.llc2.addSC("ack-max", "Max number of I-frames received before an acknowledgment must be sent"); intDialerC.llc2.addSC("adm-timer-value", "How long router waits in ADM before giving up."); intDialerC.llc2.addSC("dynwind", "Congestion control with dynamic window"); intDialerC.llc2.addSC("idle-time", "Frequency of polls during periods of idle traffic"); intDialerC.llc2.addSC("local-window", "Max number of I-frames to send before waiting for an acknowledgment"); intDialerC.llc2.addSC("t1-time", "How long router waits for an acknowledgment to transmitted I-frames"); intDialerC.llc2.addSC("tbusy-time", "Amount of time router waits while the other LLC2 station is in a busy state before attempting to poll the remote station"); intDialerC.llc2.addSC("tpf-time", "Amount of time router waits for a final response to a poll frame before re-sending the original poll frame"); intDialerC.llc2.addSC("trej-time", "Amount of time router waits for a resend of a rejected frame before sending the reject command"); intDialerC.llc2.addSC("txq-max", "Queue for holding llc2 information frames"); intDialerC.llc2.addSC("xid-neg-val-time", "Frequency of exchange of identification (XID)"); intDialerC.llc2.addSC("xid-retry-time", "How long router waits for reply to XID"); intDialerC.addSC("load-interval", "Specify interval for load calculation for an interface"); intDialerC["load-interval"].addSC("<30-600>", "Load interval delay in seconds"); intDialerC.addSC("locaddr-priority", "Assign a priority group"); intDialerC["locaddr-priority"].addSC("<1-10>", "Priority list number"); intDialerC.addSC("logging", "Configure logging for interface"); intDialerC.logging.addSC("event", "Interface events"); intDialerC.addSC("loopback", "Configure internal loopback on an interface"); intDialerC.addSC("mac-address", "Manually set interface MAC address"); intDialerC["mac-address"].addSC("H.H.H", "MAC address"); intDialerC.addSC("max-reserved-bandwidth", "Maximum Reservable Bandwidth on an Interface"); intDialerC["max-reserved-bandwidth"].addSC("<1-100>", "Max. reservable bandwidth as % of interface bandwidth"); intDialerC.addSC("mls", "mls sub/interface commands"); intDialerC.mls.addSC("rp", "rp"); intDialerC.addSC("mop", "DEC MOP server commands"); intDialerC.mop.addSC("enabled", "Enable MOP for interface"); intDialerC.mop.addSC("sysid", "Send out MOP periodic system ID messages"); intDialerC.addSC("mpls", "Configure MPLS interface parameters"); intDialerC.mpls.addSC("ip", "Configure dynamic MPLS forwarding for IP"); intDialerC.mpls.addSC("mtu", "Set tag switching Maximum Transmission Unit"); intDialerC.mpls.addSC("netflow", "Configure Egress Netflow Accounting"); intDialerC.mpls.addSC("traffic-eng", "Configure Traffic Engineering parameters"); intDialerC.addSC("mpoa", "MPOA interface configuration commands"); intDialerC.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); intDialerC.mtu.addSC("<64-18000>", "MTU size in bytes"); intDialerC.addSC("multilink-group", "Put interface in a multilink bundle"); intDialerC["multilink-group"].addSC("<1-2147483647>", "Multilink group number"); intDialerC.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); intDialerC.netbios.addSC("enable-name-cache", "Enable NETBIOS name cache on this interface"); intDialerC.netbios.addSC("input-access-filter", "Access list filter on incoming messages"); intDialerC.netbios.addSC("nbf", "Enable NetBIOS Frames Protocol (NetBEUI) on this interface"); intDialerC.netbios.addSC("output-access-filter", "Access list filter on outgoing messages"); intDialerC.addSC("network-clock-priority", "Configure clock source priority"); intDialerC["network-clock-priority"].addSC("high", "Recovered clock from line"); intDialerC["network-clock-priority"].addSC("low", "Used implicitly loop-timed clock"); intDialerC.addSC("no", "Negate a command or set its defaults"); intDialerC.no.addSC("access-expression", "Build a bridge boolean access expression"); intDialerC.no.addSC("apollo", "Apollo interface subcommands"); intDialerC.no.addSC("appletalk", "Appletalk interface subcommands"); intDialerC.no.addSC("arp", "Set arp type (arpa, probe, snap) or timeout"); intDialerC.no.addSC("asp", "ASP interface subcommands"); intDialerC.no.addSC("autodetect", "Autodetect Encapsulations on Serial interface"); intDialerC.no.addSC("bandwidth", "Set bandwidth informational parameter"); intDialerC.no.addSC("bridge-group", "Transparent bridging interface parameters"); intDialerC.no.addSC("bsc", "BSC interface subcommands"); intDialerC.no.addSC("bstun", "BSTUN interface subcommands"); intDialerC.no.addSC("carrier-delay", "Specify delay for interface transitions"); intDialerC.no.addSC("cdp", "CDP interface subcommands"); intDialerC.no.addSC("clns", "CLNS interface subcommands"); intDialerC.no.addSC("clock", "Configure serial interface clock"); intDialerC.no.addSC("compress", "Set serial interface for compression"); intDialerC.no.addSC("cpp", "Combinet Proprietary Protocol"); intDialerC.no.addSC("crypto", "Encryption/Decryption commands"); intDialerC.no.addSC("custom-queue-list", "Assign a custom queue list to an interface"); intDialerC.no.addSC("decnet", "Interface DECnet config commands"); intDialerC.no.addSC("delay", "Specify interface throughput delay"); intDialerC.no.addSC("description", "Interface specific description"); intDialerC.no.addSC("dialer", "Dial-on-demand routing (DDR) commands"); intDialerC.no.addSC("dialer-group", "Assign interface to dialer-list"); intDialerC.no.addSC("down-when-looped", "Force looped serial interface down"); intDialerC.no.addSC("dspu", "Down Stream PU"); intDialerC.no.addSC("dxi", "ATM-DXI configuration commands"); intDialerC.no.addSC("encapsulation", "Set encapsulation type for an interface"); intDialerC.no.addSC("fair-queue", "Enable Fair Queuing on an Interface"); intDialerC.no.addSC("fras", "DLC Switch Interface Command"); intDialerC.no.addSC("full-duplex", "Configure full-duplex operational mode"); intDialerC.no.addSC("h323-gateway", "Configure H323 Gateway"); intDialerC.no.addSC("half-duplex", "Configure half-duplex and related commands"); intDialerC.no.addSC("hold-queue", "Set hold queue depth"); intDialerC.no.addSC("ip", "Interface Internet Protocol config commands"); intDialerC.no.ip.addSC("access-group", "Specify access control for packets"); intDialerC.no.ip.addSC("accounting", "Enable IP accounting on this interface"); intDialerC.no.ip.addSC("address", "Set the IP address of an interface"); intDialerC.no.ip.address.addSC("A.B.C.D", "IP address"); intDialerC.no.ip.address["A.B.C.D"].addSC("A.B.C.D", "IP subnet mask"); intDialerC.no.ip.address["A.B.C.D"]["A.B.C.D"].addSC("secondary", "Make this IP address a secondary address"); intDialerC.no.ip.address.addSC("negotiated", "IP Address negotiated over PPP"); intDialerC.no.ip.address.negotiated.addSC("previous", "IPCP attempts to negotiate previous address assigned"); intDialerC.no.ip.addSC("authentication", "authentication subcommands"); intDialerC.no.ip.addSC("bandwidth-percent", "Set EIGRP bandwidth limit"); intDialerC.no.ip.addSC("bgp", "BGP interface commands"); intDialerC.no.ip.addSC("broadcast-address", "Set the broadcast address of an interface"); intDialerC.no.ip.addSC("cef", "Cisco Express Fowarding interface commands"); intDialerC.no.ip.addSC("cgmp", "Enable/disable CGMP"); intDialerC.no.ip.addSC("dhcp", "Configure DHCP parameters for this interface"); intDialerC.no.ip.addSC("directed-broadcast", "Enable forwarding of directed broadcasts"); intDialerC.no.ip.addSC("dvmrp", "DVMRP interface commands"); intDialerC.no.ip.addSC("hello-interval", "Configures IP-EIGRP hello interval"); intDialerC.no.ip.addSC("helper-address", "Specify a destination address for UDP broadcasts"); intDialerC.no.ip.addSC("hold-time", "Configures IP-EIGRP hold time"); intDialerC.no.ip.addSC("igmp", "IGMP interface commands"); intDialerC.no.ip.addSC("irdp", "ICMP Router Discovery Protocol"); intDialerC.no.ip.addSC("load-sharing", "Style of load sharing"); intDialerC.no.ip.addSC("mask-reply", "Enable sending ICMP Mask Reply messages"); intDialerC.no.ip.addSC("mobile", "Mobile IP support"); intDialerC.no.ip.addSC("mrm", "Configure IP Multicast Routing Monitor tester"); intDialerC.no.ip.addSC("mroute-cache", "Enable switching cache for incoming multicast packets"); intDialerC.no.ip.addSC("mtu", "Set IP Maximum Transmission Unit"); intDialerC.no.ip.addSC("multicast", "IP multicast interface commands"); intDialerC.no.ip.addSC("nat", "NAT interface commands"); intDialerC.no.ip.addSC("nbar", "Network-Based Application Recognition"); intDialerC.no.ip.addSC("nhrp", "NHRP interface subcommands"); intDialerC.no.ip.addSC("ospf", "OSPF interface commands"); intDialerC.no.ip.addSC("pgm", "PGM Reliable Transport Protocol"); intDialerC.no.ip.addSC("pim", "PIM interface commands"); intDialerC.no.ip.addSC("policy", "Enable policy routing"); intDialerC.no.ip.addSC("probe", "Enable HP Probe support"); intDialerC.no.ip.addSC("proxy-arp", "Enable proxy ARP"); intDialerC.no.ip.addSC("rarp-server", "Enable RARP server for static arp entries"); intDialerC.no.ip.addSC("redirects", "Enable sending ICMP Redirect messages"); intDialerC.no.ip.addSC("rgmp", "Enable/disable RGMP"); intDialerC.no.ip.addSC("rip", "Router Information Protocol"); intDialerC.no.ip.addSC("route-cache", "Enable fast-switching cache for outgoing packets"); intDialerC.no.ip.addSC("router", "IP router interface commands"); intDialerC.no.ip.addSC("rsvp", "RSVP interface commands"); intDialerC.no.ip.addSC("rtp", "RTP parameters"); intDialerC.no.ip.addSC("sap", "Session Announcement Protocol interface commands"); intDialerC.no.ip.addSC("security", "DDN IP Security Option"); intDialerC.no.ip.addSC("split-horizon", "Perform split horizon"); intDialerC.no.ip.addSC("summary-address", "Perform address summarization"); intDialerC.no.ip.addSC("tcp", "TCP header compression parameters"); intDialerC.no.ip.addSC("trigger-authentication", "Enable trigger-authentication"); intDialerC.no.ip.addSC("unnumbered", "Enable IP processing without an explicit address"); intDialerC.no.ip.addSC("unreachables", "Enable sending ICMP Unreachable messages"); intDialerC.no.ip.addSC("urd", "Configure URL Rendezvousing"); intDialerC.no.ip.addSC("verify", "Enable per packet validation"); intDialerC.no.ip.addSC("vrf", "VPN Routing/Forwarding parameters on the interface"); intDialerC.no.ip.addSC("wccp", "WCCP interface commands"); intDialerC.no.addSC("ipx", "Novell/IPX interface subcommands"); intDialerC.no.addSC("isis", "IS-IS commands"); intDialerC.no.addSC("iso-igrp", "ISO-IGRP interface subcommands"); intDialerC.no.addSC("keepalive", "Enable keepalive"); intDialerC.no.addSC("lan-name", "LAN Name command"); intDialerC.no.addSC("lat", "LAT commands"); intDialerC.no.addSC("line-power", "Provide power on the line."); intDialerC.no.addSC("llc2", "LLC2 Interface Subcommands"); intDialerC.no.addSC("load-interval", "Specify interval for load calculation for an interface"); intDialerC.no.addSC("locaddr-priority", "Assign a priority group"); intDialerC.no.addSC("logging", "Configure logging for interface"); intDialerC.no.addSC("loopback", "Configure internal loopback on an interface"); intDialerC.no.addSC("mac-address", "Manually set interface MAC address"); intDialerC.no.addSC("max-reserved-bandwidth", "Maximum Reservable Bandwidth on an Interface"); intDialerC.no.addSC("mls", "mls sub/interface commands"); intDialerC.no.addSC("mop", "DEC MOP server commands"); intDialerC.no.addSC("mpls", "Configure MPLS interface parameters"); intDialerC.no.addSC("mpoa", "MPOA interface configuration commands"); intDialerC.no.addSC("mtu", "Set the interface Maximum Transmission Unit (MTU)"); intDialerC.no.addSC("multilink-group", "Put interface in a multilink bundle"); intDialerC.no.addSC("netbios", "Use a defined NETBIOS access list or enable name-caching"); intDialerC.no.addSC("network-clock-priority", "Configure clock source priority"); intDialerC.no.addSC("shutdown","Shutdown the selected interface"); intDialerC.addSC("ntp", "Configure NTP"); intDialerC.ntp.addSC("broadcast", "Configure NTP broadcast service"); intDialerC.ntp.addSC("disable", "Disable NTP"); intDialerC.ntp.addSC("multicast", "Configure NTP multicast service"); intDialerC.addSC("ppp", "Point-to-Point Protocol"); intDialerC.ppp.addSC("accm", "Set initial Async Control Character Map"); intDialerC.ppp.addSC("authentication", "Set PPP link authentication method"); intDialerC.ppp.authentication.addSC("chap", "Challenge Handshake Authentication Protocol (CHAP)"); intDialerC.ppp.authentication.chap.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.chap.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.chap.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.chap.addSC("callout", "Authenticate remote on outgoing call only"); intDialerC.ppp.authentication.chap.callout.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.chap.callout.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.chap.callout.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.chap.addSC("optional", "Allow peer to refuse to authenticate"); intDialerC.ppp.authentication.addSC("ms-chap", "Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)"); intDialerC.ppp.authentication.addSC("pap", "Password Authentication Protocol (PAP)"); intDialerC.ppp.authentication.pap.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.addSC("callout", "Authenticate remote on outgoing call only"); intDialerC.ppp.authentication.pap.callout.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.callout.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap.callout.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.addSC("chap", "Challenge Handshake Authentication Protocol (CHAP)"); intDialerC.ppp.authentication.pap.chap.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.chap.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap.chap.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.chap.addSC("callout", "Authenticate remote on outgoing call only"); intDialerC.ppp.authentication.pap.chap.callout.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.chap.callout.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap.chap.callout.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap.addSC("ms-chap", "Microsoft Challenge Handshake Authentication Protocol (MS-CHAP)"); intDialerC.ppp.authentication.pap["ms-chap"].addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap["ms-chap"].callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].addSC("callout", "Authenticate remote on outgoing call only"); intDialerC.ppp.authentication.pap["ms-chap"].callout.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].callout.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap["ms-chap"].callout.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].addSC("chap", "Challenge Handshake Authentication Protocol (CHAP)"); intDialerC.ppp.authentication.pap["ms-chap"].chap.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].chap.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap["ms-chap"].chap.callin.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].chap.addSC("callout", "Authenticate remote on outgoing call only"); intDialerC.ppp.authentication.pap["ms-chap"].chap.callout.addSC("callback", "Authenticate remote on callback only"); intDialerC.ppp.authentication.pap["ms-chap"].chap.callout.addSC("callin", "Authenticate remote on incoming call only"); intDialerC.ppp.authentication.pap.addSC("optional", "Allow peer to refuse to authenticate"); intDialerC.ppp.addSC("bap", "Set BAP bandwidth allocation parameters"); intDialerC.ppp.addSC("bridge", "Enable PPP bridge translation"); intDialerC.ppp.addSC("callback", "Set PPP link callback option"); intDialerC.ppp.addSC("chap", "Set CHAP authentication parameters"); intDialerC.ppp.addSC("encrypt", "Enable PPP encryption"); intDialerC.ppp.addSC("ipcp", "Set IPCP negotiation options"); intDialerC.ppp.addSC("lcp", "PPP LCP configuration"); intDialerC.ppp.addSC("link", "Set miscellaneous link parameters"); intDialerC.ppp.addSC("max-bad-auth", "Allow multiple authentication failures"); intDialerC.ppp.addSC("multilink", "Make interface multilink capable"); intDialerC.ppp.addSC("pap", "Set PAP authentication parameters"); intDialerC.ppp.pap.addSC("refuse", "Refuse to authenticate using PAP"); intDialerC.ppp.pap.addSC("sent-username", "Set outbound PAP username"); intDialerC.ppp.pap["sent-username"].addSC("WORD", "Outbound PAP username"); intDialerC.ppp.pap["sent-username"].WORD.addSC("password", "Set outbound PAP password"); intDialerC.ppp.pap["sent-username"].WORD.password.addSC("<0-7>", "Encryption type (0=not yet encrypted)"); intDialerC.ppp.pap["sent-username"].WORD.password["<0-7>"].addSC("LINE", "Outbound PAP password"); intDialerC.ppp.addSC("quality", "Set minimum Link Quality before link is down"); intDialerC.ppp.addSC("reliable-link", "Use LAPB with PPP to provide a reliable link"); intDialerC.ppp.addSC("timeout", "Set PPP timeout parameters"); intDialerC.ppp.addSC("use-tacacs", "Use TACACS to verify PPP authentications"); intDialerC.addSC("priority-group", "Assign a priority group to an interface"); intDialerC["priority-group"].addSC("<1-16>", "Priority group"); intDialerC.addSC("pulse-time", "Force DTR low during resets"); intDialerC["pulse-time"].addSC("<0-60>", "DTR low time in seconds"); intDialerC["pulse-time"].addSC("msec", "millisecond (resolution)"); intDialerC.addSC("random-detect", "Enable Weighted Random Early Detection (WRED) on an Interface"); intDialerC["random-detect"].addSC("dscp-based", "Enable dscp based WRED on an inteface"); intDialerC["random-detect"].addSC("prec-based", "Enable prec based WRED on an interface"); intDialerC.addSC("rate-limit", "Rate Limit"); intDialerC["rate-limit"].addSC("input", "Rate limit on input"); intDialerC["rate-limit"].addSC("output", "Rate limit on output"); intDialerC.addSC("sap-priority", "Assign a priority group"); intDialerC["sap-priority"].addSC("<1-10>", "Priority list number"); intDialerC.addSC("sdllc", "Configure SDLC to LLC2 translation"); intDialerC.sdllc.addSC("partner", "MAC address for partner"); intDialerC.sdllc.addSC("ring-largest-frame", "Set the largest I-frame size that can be sent or received from the LLC2 primary station"); intDialerC.sdllc.addSC("saps", "Configure lsap and dsap for token ring"); intDialerC.sdllc.addSC("sdlc-largest-frame", "Set the largest I-frame size that can be sent or received by a SDLC station at a specified address"); intDialerC.sdllc.addSC("traddr", "Enable SDLLC translation and assign MAC address to interface"); intDialerC.sdllc.addSC("xid", "Specify an XID value to be associated with the SDLC station at a specified address"); intDialerC.addSC("serial", "serial interface commands"); intDialerC.serial.addSC("restart-delay", "Configure serial interface restart-delay"); intDialerC.addSC("service-policy", "Configure QoS Service Policy"); intDialerC["service-policy"].addSC("history", "Keep history of QoS metrics"); intDialerC["service-policy"].addSC("input", "Assign policy-map to the input of an interface"); intDialerC["service-policy"].addSC("output", "Assign policy-map to the output of an interface"); intDialerC.addSC("shutdown", "Shutdown the selected interface"); intDialerC.addSC("smds", "Modify SMDS parameters"); intDialerC.smds.addSC("address", "Set an interface SMDS address"); intDialerC.smds.addSC("dxi-mode", "SMDS DXI3.2 mode"); intDialerC.smds.addSC("enable-arp", "Enable ARP processing."); intDialerC.smds.addSC("glean-mode", "SMDS GLEAN mode"); intDialerC.smds.addSC("multicast", "Set an SMDS multicast (or broadcast) address"); intDialerC.smds.addSC("nec-mode", "SMDS NEC mode"); intDialerC.smds.addSC("static-map", "Map high level protocol address to SMDS address"); intDialerC.addSC("smrp", "Simple Multicast Routing Protocol interface subcommands"); intDialerC.smrp.addSC("mroute-cache", "Enable SMRP route cache"); intDialerC.smrp.addSC("protocol", "Specify network layer service protocol"); intDialerC.addSC("sna", "SNA pu configuration"); intDialerC.sna.addSC("enable-host", "SNA Enable Host command"); intDialerC.sna.addSC("start", "SNA Start command"); intDialerC.addSC("snapshot", "Configure snapshot support on the interface"); intDialerC.snapshot.addSC("client", "Enable client control of Snapshot routing"); intDialerC.snapshot.addSC("server", "Send routing updates out this link when updates are received"); intDialerC.addSC("snmp", "Modify SNMP interface parameters"); intDialerC.snmp.addSC("ifindex", "Persist ifindex for the interface"); intDialerC.snmp.addSC("trap", "Allow a specific SNMP trap"); intDialerC.addSC("source", "Get config from another source"); intDialerC.source.addSC("template", "Get config from a template"); intDialerC.addSC("stun", "STUN interface subcommands"); intDialerC.stun.addSC("group", "Assign an interface to a STUN group"); intDialerC.stun.addSC("proxy-poll", "Proxy polling of devices"); intDialerC.stun.addSC("route", "Set forwarding of STUN frames"); intDialerC.stun.addSC("sdlc-role", "SDLC device behavior"); intDialerC.addSC("tag-switching", "Tag Switching interface configuration commands"); intDialerC["tag-switching"].addSC("ip", "Configure IP dynamic Tag Switching"); intDialerC["tag-switching"].addSC("mtu", "Set tag switching Maximum Transmission Unit"); intDialerC.addSC("tarp", "TARP interface subcommands"); intDialerC.tarp.addSC("enable", "Enable TARP on interface"); intDialerC.tarp.addSC("propagate", "Enable propagation of TARP PDU's out on this interface"); intDialerC.tarp.addSC("split-horizon", "Enable split horizon for TARP propagation on this interface"); intDialerC.addSC("timeout", "Define timeout values for this interface"); intDialerC.timeout.addSC("absolute", "Define session timeout value for this interface"); intDialerC.addSC("transmit-interface", "Assign a transmit interface to a receive-only interface"); intDialerC["transmit-interface"].addSC("Async", "Async interface"); intDialerC["transmit-interface"].addSC("BRI", "ISDN Basic Rate Interface"); intDialerC["transmit-interface"].addSC("CTunnel", "CTunnel interface"); intDialerC["transmit-interface"].addSC("Dialer", "Dialer interface"); intDialerC["transmit-interface"].addSC("Ethernet", "IEEE 802.3"); intDialerC["transmit-interface"].addSC("Group-Async", "Async Group interface"); intDialerC["transmit-interface"].addSC("Lex", "Lex interface"); intDialerC["transmit-interface"].addSC("Loopback", "Loopback interface"); intDialerC["transmit-interface"].addSC("Multilink", "Multilink-group interface"); intDialerC["transmit-interface"].addSC("Null", "Null interface"); intDialerC["transmit-interface"].addSC("Serial", "Serial"); intDialerC["transmit-interface"].addSC("Tunnel", "Tunnel interface"); intDialerC["transmit-interface"].addSC("Vif", "PGM Multicast Host interface"); intDialerC["transmit-interface"].addSC("Virtual-Template", "Virtual Template interface"); intDialerC["transmit-interface"].addSC("Virtual-TokenRing", "Virtual TokenRing"); intDialerC.addSC("trunk-group", "Configure interface to be in a trunk group"); intDialerC["trunk-group"].addSC("<1-1000>", "Trunk group number"); intDialerC.addSC("tx-ring-limit", "Configure PA level transmit ring limit"); intDialerC["tx-ring-limit"].addSC("<1-32767>", "Number (ring limit)"); intDialerC.addSC("vines", "VINES interface subcommands"); intDialerC.vines.addSC("access-group", "Apply a VINES access list"); intDialerC.vines.addSC("arp-enable", "Supply VINES addresses to booting clients"); intDialerC.vines.addSC("encapsulation", "VINES encapsulation"); intDialerC.vines.addSC("input-network-filter", "Filter networks in received routing updates"); intDialerC.vines.addSC("input-router-filter", "Filter source of received routing updates"); intDialerC.vines.addSC("metric", "VINES processing on the selected interface"); intDialerC.vines.addSC("neighbor", "Create a static neighbor entry"); intDialerC.vines.addSC("output-network-filter", "Filter networks sent in routing updates"); intDialerC.vines.addSC("propagate", "Ignore 'class' field during broadcast forwarding"); intDialerC.vines.addSC("redirect", "Set redirect interval"); intDialerC.vines.addSC("route-cache", "Fast switch VINES packets out this interface"); intDialerC.vines.addSC("serverless", "The attached network has no Banyan server"); intDialerC.vines.addSC("split-horizon", "Split-horizon routing updates"); intDialerC.vines.addSC("update", "Set RTP update characteristics for this interface"); intDialerC.addSC("xns", "XNS interface subcommands"); intDialerC.xns.addSC("access-group", "Apply an access list to output packets"); intDialerC.xns.addSC("encapsulation", "Set encapsulation method for XNS packets"); intDialerC.xns.addSC("flood", "Flood XNS packets"); intDialerC.xns.addSC("hear-rip", "Listen to RIP updates"); intDialerC.xns.addSC("helper-address", "Forward broadcasts to a specific address"); intDialerC.xns.addSC("input-network-filter", "Filter incoming routing updates"); intDialerC.xns.addSC("network", "Assign an XNS network & enable XNS routing"); intDialerC.xns.addSC("output-network-filter", "Filter outgoing routing updates"); intDialerC.xns.addSC("route-cache", "Enable fast switching"); intDialerC.xns.addSC("router-filter", "Filter sources of routing updates"); intDialerC.xns.addSC("update-time", "Set XNS routing update timer");