add new repoHEADmaster

1 files changed, 91 insertions, 0 deletions

diff --git a/Bachelor/CCNA4/en_CCNA4_v30/elabs/Engine/Router 806/cmd_linevty.txt b/Bachelor/CCNA4/en_CCNA4_v30/elabs/Engine/Router 806/cmd_linevty.txt
new file mode 100644
index 0000000..1205c92
--- /dev/null
+++ b/Bachelor/CCNA4/en_CCNA4_v30/elabs/Engine/Router 806/cmd_linevty.txt
@@ -0,0 +1,91 @@
+

+linevtyC.addSC("absolute-timeout", "Set absolute timeout for line disconnection");

+linevtyC.addSC("access-class", "Filter connections based on an IP access list");

+linevtyC.addSC("activation-character", "Define the activation character");

+linevtyC.addSC("autobaud", "Set line to normal autobaud");

+linevtyC.addSC("autocommand", "Automatically execute an EXEC command");

+linevtyC.addSC("autocommand-options", "Autocommand options");

+linevtyC.addSC("autohangup", "Automatically hangup when last connection closes");

+linevtyC.addSC("autoselect", "Set line to autoselect");

+linevtyC.addSC("data-character-bits", "Size of characters being handled");

+linevtyC.addSC("databits", "Set number of data bits per character");

+linevtyC.addSC("default", "Set a command to its defaults");

+linevtyC.addSC("disconnect-character", "Define the disconnect character");

+linevtyC.addSC("dispatch-character", "Define the dispatch character");

+linevtyC.addSC("dispatch-machine", "Reference a TCP dispatch state machine");

+linevtyC.addSC("dispatch-timeout", "Set the dispatch timer");

+linevtyC.addSC("domain-lookup", "Enable domain lookups in show commands");

+linevtyC.addSC("editing", "Enable command line editing");

+linevtyC.addSC("escape-character", "Change the current line's escape character");

+linevtyC.addSC("exec", "Start an EXEC process");

+linevtyC.addSC("exec-banner", "Enable the display of the EXEC banner");

+linevtyC.addSC("exec-character-bits", "Size of characters to the command exec");

+linevtyC.addSC("exec-timeout", "Set the EXEC timeout");

+	linevtyC["exec-timeout"].addSC("<0-35791>", "Timeout in minutes");

+		linevtyC["exec-timeout"]["<0-35791>"].addSC("<0-2147483>", "Timeout in seconds");

+linevtyC.addSC("exit", "Exit from line configuration mode");

+linevtyC.addSC("flowcontrol", "Set the flow control");

+	linevtyC.flowcontrol.addSC("NONE", "Set no flow control");

+	linevtyC.flowcontrol.addSC("software", "Set software flow control");

+linevtyC.addSC("flush-at-activation", "Clear input stream at activation");

+linevtyC.addSC("full-help", "Provide help to unprivileged user");

+linevtyC.addSC("help", "Description of the interactive help system");

+linevtyC.addSC("history", "Enable and control the command history function");

+linevtyC.addSC("hold-character", "Define the hold character");

+linevtyC.addSC("insecure", "Mark line as 'insecure' for LAT");

+linevtyC.addSC("international", "Enable international 8-bit character support");

+linevtyC.addSC("ip", "IP options");

+linevtyC.addSC("location", "Enter terminal location description");

+linevtyC.addSC("lockable", "Allow users to lock a line");

+linevtyC.addSC("logging", "Modify message logging facilities");

+linevtyC.addSC("login", "Enable password checking");

+	linevtyC.login.addSC("local", "Local password checking");

+	linevtyC.login.addSC("tacacs", "Use tacacs server for password checking");

+linevtyC.addSC("logout-warning", "Set Warning countdown for absolute timeout of line");

+linevtyC.addSC("modem", "Configure the Modem Control Lines");

+	linevtyC.modem.addSC("CTS-Alarm", "Alarm device which only uses CTS for call control");

+	linevtyC.modem.addSC("DTR-active", "Leave DTR low unless line has an active incoming connection or EXEC");

+	linevtyC.modem.addSC("Dialin", "Configure line for a modern dial-in modem");

+	linevtyC.modem.addSC("Host", "Devices that expect an incoming modem call");

+	linevtyC.modem.addSC("InOut", "Configure line for incoming AND outgoing use of modem");

+	linevtyC.modem.addSC("Printer", "Devices that require DSR/CD active");

+	linevtyC.modem.addSC("answer-timeout", "Set interval between raising DTR and CTS response");

+	linevtyC.modem.addSC("dtr-delay", "Set interval during which DTR is held low");

+linevtyC.addSC("monitor", "Copy debug output to the current terminal line");

+linevtyC.addSC("motd-banner", "Enable the display of the MOTD banner");

+linevtyC.addSC("no", "Negate a command or set its defaults");

+linevtyC.addSC("notify", "Inform users of output from concurrent sessions");

+linevtyC.addSC("padding", "Set padding for a specified output character");

+linevtyC.addSC("parity", "Set terminal parity");

+linevtyC.addSC("password", "Set a password");

+	linevtyC.password.addSC("LINE", "The UNENCRYPTED (cleartext) line password");

+linevtyC.addSC("private", "Configuration options that user can set will remain in effect between terminal sessions");

+linevtyC.addSC("privilege", "Change privilege level for line");

+linevtyC.addSC("refuse-message", "Define a refuse banner");

+linevtyC.addSC("rotary", "Add line to a rotary group");

+linevtyC.addSC("rxspeed", "Set the receive speed");

+linevtyC.addSC("script", "specify event related chat scripts to run on the line");

+linevtyC.addSC("session-disconnect-warning", "Set warning countdown for session-timeout");

+linevtyC.addSC("session-limit", "Set maximum number of sessions");

+linevtyC.addSC("session-timeout", "Set interval for closing connection when there is no input traffic");

+linevtyC.addSC("special-character-bits", "Size of the escape (and other special) characters");

+linevtyC.addSC("speed", "Set the transmit and receive speeds");

+	linevtyC.speed.addSC("<0-4294967295>", "Transmit and receive speeds");

+linevtyC.addSC("start-character", "Define the start character");

+linevtyC.addSC("stop-character", "Define the stop character");

+linevtyC.addSC("stopbits", "Set async line stop bits");

+	linevtyC.stopbits.addSC("1.5", "One and one-half stop bits");

+linevtyC.addSC("telnet", "Telnet protocol-specific configuration");

+linevtyC.addSC("terminal-type", "Set the terminal type");

+linevtyC.addSC("timeout", "Timeouts for the line");

+linevtyC.addSC("transport", "Define transport protocols for line");

+	linevtyC.transport.addSC("input", "Define which protocols to use when connecting to the terminal server");

+		linevtyC.transport.input.addSC("all", "All protocols");

+		linevtyC.transport.input.addSC("none", "No protocols");

+		linevtyC.transport.input.addSC("rlogin", "Unix rlogin protocol");

+		linevtyC.transport.input.addSC("telnet", "TCP/IP Telnet protocol");

+	linevtyC.transport.addSC("output", "Define which protocols to use for outgoing connections");

+	linevtyC.transport.addSC("preferred", "Specify the preferred protocol to use");

+linevtyC.addSC("txspeed", "Set the transmit speeds");

+linevtyC.addSC("vacant-message", "Define a vacant banner");

+linevtyC.addSC("width", "Set width of the display terminal");